Installation; Functional Description - Makita 2012NB Instruction Manual

WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product.
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.

INSTALLATION

Movement and transport of planer
1
2
003707
CAUTION:
Watch your step when moving the tool.
•
Fold the sub-tables. Grasp the carrying handles when
moving the tool.
When transporting it by vehicle, secure with a rope or
other substantial means to prevent tipping or movement.
Positioning the planer
003708
Locate the tool in a well lit and level place where you can
maintain good footing and balance. Bolt/screw it to the
workbench or stand (optional accessory) using the bolt
holes provided in the base.
1. Carrying handle
2. Sub-table
1. Bolt or screw
1

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function on
the tool.
Switch action
CAUTION:
Before plugging in the tool, always be sure that the
•
tool is switched off. The pilot lamp lights up when
the tool is plugged into the power source.
For tool with switch lever
ON OFF
1
004547
To start the tool, raise the switch lever. To stop it, lower
the switch lever.
For tool with switch buttons
1
2
004463
To start the tool, press the ON ( 1 ) button. To stop it,
press the OFF ( O ) button.
Dimensional adjustment
1
2
3
003710
Lower the main frame by turning the crank handle
counterclockwise until the indicator plate points to the
scale graduation
dimension. One full turn of the crank handle moves the
main frame 2 mm up or down. The scale has inch
4
1. Pilot lamp
2. Switch lever
2
1. Pilot lamp
2. Switch
1. Crank handle
2. Scale
3. Indicator plate
4. Main frame
4
indicating the desired finished