Table of Contents
Advertisement
Advanced Settings/Passcode
5.
Enter a unique 4-digit PIN in the input box under Access PIN and
click on Write to Instrument.
6.
Click Set Config to tell the dock to upload the PIN setting to the
instruments. The software will automatically show the Security
Login screen a second time and prompt you for your user name and
password. Once a valid User ID and Password have been entered,
PIN Lock Writing Enabled will be shown in the dock configuration
window. The dock is now ready to upload the PIN to the instruments.
7.
Place the instrument(s) that is/are to be configured with the PIN in
the dock while PIN Lock Writing is enabled.
33
8.
Once the PIN has been uploaded to all of the instruments, access
the dock's advanced settings again and click on Check PIN. Then
click the Set Config button.
Enter your User ID and password again when the Security Login
window is shown. A window will be shown to indicate that the dock
configuration has been updated.
9.
Click OK. PIN Lock Enabled will then be shown in the PC software
in the dock configuration window.
IQ Force™ Dock Reference Manual
Advertisement
Table of Contents
