Honeywell IQ Force Dock Reference Manual page 29

Initial PC–Dock Connection
Then this screen is displayed, indicating how much memory in the dock is
free for storing calibration records:
----------------
IQ Force Dock
100% Memory Free
----------------
The configuration of the gas connected to the dock is then displayed
(see Section 3.1.10), followed by the interval at which instruments will be
calibrated in the dock (see Section
----------------
GAS CO/H2S/LEL
----------------
----------------
Dock Calibration
Interval=30 days
----------------
If the USB cable is not connected to the dock, the following three screens
are displayed:
----------------
Network Module
----------------
----------------
Network Module
----------------
21
3.1.9):
100/25/50
Checking
Configuring
----------------
IP Address Is
151.150.10.201
----------------
When the dock is ready to accept an instrument, it alternates between the
following two screens:
----------------
READY
----------------
----------------
READY
CO/H2S/LEL
----------------
NOTE
The asterisk to the right of the time indicates that the
dock is connected to the PC and that the IQ Force Dock PC
software is running.
If the dock is running in standalone mode and has test records stored, a third
screen in the sequence will display the number of records.
----------------
READY
----------------
10:25*
20 APR 2012
10:25*
10:25
2 Records
IQ Force™ Dock Reference Manual