Connecting The Modem; Connect The Cable Modem To Your Computer; Figure 3 - Sb6141 Connection Diagram - Arris SURFboard SB6141 User Manual

Connecting the Modem

3
This product is for indoor use only. Do not route the Ethernet cable(s)
outside of the building. Exposure of the cables to lightning could create a
safety hazard and damage the product.

Connect the Cable Modem to Your Computer

Before installing the cable modem:
•
Check with your service provider to ensure broadband cable service is available in your area.
•
Choose a location in your home where your computer and cable modem are preferably near
existing cable and electrical wall outlets.
1. Check that a coaxial cable is connected to a cable wall outlet or RF splitter (optional).
2. Connect the other end of the coaxial cable to the Cable connector on the cable modem.
Use your hand to tighten the connectors to avoid damaging them.
3. Connect the Ethernet cable to the Ethernet port on the cable modem.
4. Connect the other end of the Ethernet cable to the Ethernet port on your computer.
SURFboard® SB6141 • DOCSIS® 3.0 Cable Modem • User Guide
365-095-25778-x.1
Connecting the Modem
Figure 3 – SB6141 Connection Diagram
5