Installation guide for Cisco TelePresence MX700 Dual camera - Wall mount
10
Fasten left monitor and connect power cable
4 × M6x90
(countersunk)
4 × M6x35
(countersunk)
78-100279-01 B0 | 2014 JUNE | © 2014 Cisco Systems, Inc. All rights reserved.
Enter four screws
1
from front and
four screws from
underneath. Then,
tighten all screws.
A power cable is strapped at
2
the rear of the monitor. Connect
it to the close-by socket.
Let the other end hang freely.
It will be connected to the right
monitor in step 12.
Page 13