Cisco TelePresence SX20 Quick Set
Contents
Safety instructions,
continued..
Servicing
Do not attempt to service the apparatus yourself because
opening or removing covers may expose you to dangerous
voltages or other hazards, and will void the warranty. Refer all
servicing to qualified service personnel. (Change of batteries
in the remote control, according to user manual, can be done
by the user).
Unplug the apparatus from its power source and refer servicing
to qualified personnel under the following conditions:
•
If the power cord or plug is damaged or frayed.
•
If liquid has been spilled into the apparatus.
•
If objects have fallen into the apparatus.
•
If the apparatus has been exposed to rain or moisture.
•
If the apparatus has been subjected to excessive shock by
being dropped.
•
If the cabinet has been damaged.
•
If the apparatus seems to be overheated.
•
If the apparatus emits smoke or abnormal odor.
•
If the apparatus fails to operate in accordance with the
operating instructions.
Accessories
Use only accessories specified by the manufacturer, or sold
with the apparatus.
Communication Lines
Do not use communication equipment to report a gas leak in the
vicinity of the leak.
D14943.03 SX20
Quick Set Regulatory Compliance and Safety Information, December 2012.
© 2012 Cisco Systems, Inc. All rights reserved.
Introduction
Safety instructions
Safety instructions
Statement 371 - Power Cable and AC Adapter
Regulatory compliance and safety information guide
Approvals
5
China RoHS table
Contact us
www.cisco.com