Lift And Place Right Monitor Onto Lower Frame - Cisco TelePresence MX700 Installation Manual

Installation guide for Cisco TelePresence MX700 Dual camera - Wall mount
11

Lift and place right monitor onto lower frame

D
65 kg / 144 lb
Make sure that the screw with wing nut
1
enters the center slot on both sides.
Keep the outer side a bit lower than
the side toward the left monitor when
lowering the right monitor onto the
lower frame.
Do not let go of the monitor before it is
securely placed on the lower frame.
78-100279-01 B0 | 2014 JUNE | © 2014 Cisco Systems, Inc. All rights reserved.
Rear view
Rear view
Tighten the wing nuts
2
on both sides. They are
accessed from the sides
of the monitor.
Page 14