Explanation Of Modes; Monitor Mode Contents - Hitachi J300 Series Instruction Manual

7.7

Explanation of Modes

(1) Monitor mode contents

Monitor
mode
contents
Output
frequency
monitor
Motor
rotation
speed
monitor
Output
current
monitor
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
The frequency outputted by the inverter is monitored.
The display is as shown below.
FUNC
FUNC
The rotational frequency converted value of the frequency outputted by the inverter
is displayed.
(Note that the value is not the real rotational frequency of the motor.)
The converted value is displayed as shown below using "rotational frequency/100."
FUNC
FUNC
NOTE: Motor pole number can be set by
The current outputted by the inverter is monitored. The display is as shown below.
FUNC
FUNC
Contents and display
Display when stopped
.
(1)
to
. .
(2)
to
.
(3)
to
Display when stopped
.
(1)
to
. .
(2)
to
.
(3)
to
Display
when
.
stopped
to
.
(2)
to
7-7
A frequency between 0.01 Hz
and 9.99 Hz is displayed in units
of 0.01 Hz.
A frequency between 10.0 Hz
99.9 Hz is displayed in units
.
of 0.1 Hz.
A frequency between 100 Hz and
400 Hz is displayed in units of
1 Hz.
The converted value is displayed
in units of 0.01 (1 rpm).
From 1 to 999 rpm
The converted value is displayed
in units of 0.1 (10 rpm).
.
From 1000 to 9990 rpm
The converted value is displayed
in units of 1 (100 rpm).
From 10000 to 60000 rpm
.
The output display accuracy is about ±10%.
Inverter output current:
Monitor display current:
Rated current of the inverter: I
I - I
MC M
× 100 ≤ ±10%
I
R
A current between 0.1 and 99.9 A
is displayed in units of 0.1 A.
.
A current between 100 A and 999 A
is displayed in units of 1 A.
I
M
I
MC
R