Honeywell STT850 SMARTLINE User Manual page 41

<Return>
Enter LRV
Enter LRV
<Return>
Enter URV
Enter URV
<Return>
Enter MRV
Enter MRV
<Return>
Set LRV
Set LRV
<Return>
Set URV
Set URV
<Return>
Device ID
Universal
Rev
HART
Field Device
Setup
Rev
Final Assy
Num
Loop mA
Poll Address
PV Units
SV Units
<Return>
Year # # # #
Month
Day # #
HART Date
Write Date
Revision 1
###. ##
###. ##
###.##
ATTENTION: Executing this service will set the
Lower Range Value (LRV) equal to the Input 1
measurement
ATTENTION: Executing this service will set the
Upper Range Value (URV) equal to the Input 1
measurement
Unique for each device Read Only
HART Revision Read Only
For DD/DTM compatibility Read Only
Asset tracking number
Disabled for Multidrop
0 (default) to 63
Units of transmitted PV
Units of transmitted SV
Enter the current year
January through
December
Enter the day of
the month
Press ENTER to
write the HART
Date to the
Transmitter
STT850 Temperature Transmitter User's Manual
The limit for the Lower Range
Value is the Lower Range
Limit (LRL) of the selected
Sensor ID.
The limit for the Upper Range
Value is the Upper Range
Limit (URL) of the selected
Sensor ID.
Limits are the minimum URL
and maximum LRL of the
selected Sensor 1 and Sensor
2 IDs. Determines the point of
transition of Loop Control
between Sensor 1 and Sensor
2 for Split-Range Loop Control
Mode.
Select the current month
Press ↵ to
enter menu
selection
↵ to execute
Press ↵ to
enter menu
selection
↵ to execute
Page 31