Chapter 6 Storage Settings - HIKVISION DS-2CD2012-I User Manual

User Manual of Network Camera
1) Configure the FTP settings and check
Settings interface. Please refer to Section 6.3.8 Configuring FTP Settings for more
details to configure FTP parameters.
2) Check the Enable Timing Snapshot checkbox.
 Upload event-triggered snapshots to FTP
Steps:
1) Configure the FTP settings and check
Settings interface. Please refer to Section 6.3.8 Configuring FTP Settings for more
details to configure FTP parameters.
2) Check
interface. Please refer to Step 3 Set the Alarm Actions Taken for Motion
Detection in Section 6.6.1, or Step 4 Configuring External Alarm Input in Section
6.6.4.
3) Check the Enable Event-triggered Snapshot checkbox.

Chapter 6 Storage Settings

Before you start:
To configure record settings, please make sure that you have the network storage
device within the network or the SD card inserted in your camera.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
checkbox in Motion Detection Settings or Alarm Input
Snapshot Settings
Figure 5-37
53
checkbox in FTP
checkbox in FTP