Configuring Email Settings - HIKVISION DS-2CD2012-I User Manual

User Manual of Network Camera
3. Click

5.6.7 Configuring Email Settings

Purpose:
The system can be configured to send an Email notification to all designated
receivers if an alarm event is detected, e.g., motion detection event, video loss,
tamper-proof, etc.
Before you start:
Please configure the DNS Server settings under Basic Configuration > Network >
TCP/IP or Advanced Configuration > Network > TCP/IP before using the Email
function.
Steps:
1. Enter the
TCP/IP Settings (
Configuration > Advanced Configuration > Network > TCP/IP) to set the IPv4
Address, IPv4 Subnet Mask, IPv4 Default Gateway and the Preferred DNS Server.
Note: Please refer to Section 6.3.1 Configuring TCP/IP Settings for detailed
information.
2. Enter the Email Settings interface:
Configuration > Advanced Configuration > Events > Email
3. Configure the following settings:
Sender: The name of the email sender.
Sender's Address: The email address of the sender.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
to save the settings.
Configuration > Basic Configuration > Network > TCP/IP or
Email Settings
Figure 5-36
51