Configuring Video Loss Alarm - HIKVISION DS-2CD2012-I User Manual

47
User Manual of Network Camera

5.6.3 Configuring Video Loss Alarm

Steps:
1. Enter the Video Loss Setting interface:
Configuration > Advanced Configuration> Events > Video Loss
Video Loss
Figure 5-31
2. Check the Enable Video Loss Detection checkbox to enable the video loss
detection.
3. Click to edit the arming schedule for video loss detection. The
arming schedule configuration is the same as the setting of the arming schedule for
motion detection. Refer to Step 2 Set the Arming Schedule for Motion Detection in
Section 6.6.1.
4. Check the checkbox to select the linkage method taken for the video loss alarm.
Audible warning, notify surveillance center, send email and trigger alarm output are
selectable. Please Step 3 Set the Alarm Actions for Motion Detection in Section 6.6.1.
5. Click to save the settings.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.