Cisco SPA50X User Manual page 59

Using the Phone Web User Interface
Setting Voice User Parameters
Cisco Small Business SPA50X and SPA51X Series SPCP IP Phone User Guide
Parameter Description
Block ANC Choose yes to block anonymous callers. Choose no to
Setting disable the feature. Blocking anonymous calls prevents a
call with an unknown Caller ID from ringing your phone. For
example, if a caller set their phone to not display their Caller
ID, the call is considered anonymous. These callers receive
a busy signal or message.
DND Setting Choose yes to enable Do Not Disturb. Choose no to disable
the feature. When enabled, the Do Not Disturb feature to
prevents incoming calls from ringing your phone. If you
have voice mail configured, incoming callers are
immediately sent to voice mail. If voice mail is not
configured, callers hear a busy signal or a message.
Dial Assistance If dial assistance is enabled, when placing calls, you will
see a list of matching, recently–dialed or received phone
numbers on the IP phone screen as you begin dialing.
Preferred Audio Choose the preferred audio device. When you answer a
Device call by pressing the line button, the audio is directed to the
headset or the speaker.
Time Format Choose the time format. Choose 12hr to display the time as
am or pm. Choose 24hr to display the time as a 24-hour
clock.
Date Format Choose the date format. Choose month/day to display the
date in month-day sequence. Choose day/month to display
the date in day-month sequence.
Text Message Choose yes to enable text messaging from the phone.
Choose no to disable the feature.
Text Message Choose yes to enable receiving text messaging from
from 3rd Party others on the phone. Choose no to disable the feature.
Alert Tone Off Choose yes to disable the alert tone sounded when a text
message is received on the phone. Choose no to enable
the alert tone.
Ringer Volume Enter a volume between 1 and 10, with 1 being the lowest
Speaker Volume level.
Headset Volume
Headset Volume
5
58