Verifying Your Configuration - Cisco ASR 5000 Series Administration Manual

▀ Verifying Your Configuration

Verifying Your Configuration
This section explains how to display and review the configurations after saving them in a .cfg file as described in Saving
Your Configuration chapter of this guide and also to retrieve errors and warnings within an active configuration for a
service.
I
MPORTANT
These instructions are used to verify the Subscriber Session Trace configuration.
Step 1
Verify that your subscriber session support is configured properly by entering the following command in Exec Mode:
The output of this command displays the statistics of the session trace instance.
Step 2
View the session trace references active for various network elements in an EPC network by entering the following
command in Exec Mode:
The output of this command displays the summary of trace references for all network elements:
▄ Cisco ASR 5000 Series Serving Gateway Administration Guide
:
All commands listed here are under Exec mode. Not all commands are available on all platforms.
Configuring Subscriber Session Tracing
OL-22986-01