Cisco ASR 5000 Series Administration Manual page 62

▀ Configuring the System as a Standalone eGTP S-GW
Creating an S-GW Egress Context
Use the following example to create an S-GW egress context and Ethernet interface to a P-GW and bind the interface to
configured Ethernet ports.
Notes:
The S5/S8 interface IP address can also be specified as an IPv4 address using the
Creating an eGTP Egress Service
Use the following configuration example to create an eGTP egress service in the S-GW egress context:
▄ Cisco ASR 5000 Series Serving Gateway Administration Guide
Serving Gateway Configuration
command.
OL-22986-01