Cisco ASR 5000 Series Administration Manual page 64

▀ Configuring the System as a Standalone eGTP S-GW
Notes:
The
address using the
Configuring the S-GW Service
Use the following example to configure the S-GW service:
Configuring an IP Route
Use the following example to configure an IP Route for control and user plane data communication with an eGTP PDN
Gateway:
▄ Cisco ASR 5000 Series Serving Gateway Administration Guide
command in the GTP-U ingress and egress service configuration can also be specified as an IPv6
command.
Serving Gateway Configuration
OL-22986-01