Initial Configuration - Cisco ASR 5000 Series Administration Manual

▀ Configuring the System as a Standalone eGTP S-GW

Initial Configuration

Step 1
Set local system management parameters by applying the example configuration in the
section.
Step 2
Create an ingress context where the S-GW and eGTP ingress service will reside by applying the example configuration
in the Creating an S-GW Ingress Context
Step 3
Create an eGTP ingress service within the newly created ingress context by applying the example configuration in the
Creating an eGTP Ingress Service
Step 4
Create an S-GW egress context where the eGTP egress services will reside by applying the example configuration in the
Creating an S-GW Egress Context
Step 5
Create an eGTP egress service within the newly created egress context by applying the example configuration in the
Creating an eGTP Egress Service
Step 6
Create a S-GW service within the newly created ingress context by applying the example configuration in the
an S-GW Service
Modifying the Local Context
Use the following example to set the default subscriber and configure remote access capability in the local context:
▄ Cisco ASR 5000 Series Serving Gateway Administration Guide
section.
section.
section.
section.
section.
Serving Gateway Configuration
Modifying the Local Context
Creating
OL-22986-01