Buffalo AirStation NFINITI WHR-HP-G300N Firmware User Manual page 85

Chapter 4 Configuration
Parameter
Broadcast SSID
[Use Multi Security function]
[Do not use Multi Security function]
SSID1
SSID2
SSID3
Separate feature
SSID
Wireless authentication
WHR-HP-GN / WHR-HP-G300N User Manual
Meaning
If [Allow] is checked, then the AirStation will respond to SSID
searches from wireless devices by broadcasting its SSID. If [Allow] is
unchecked, then the AirStation ignore SSID searches from wireless
devices.
Clicking [Use Multi Security function] will enable Multi Security,
allowing the use of multiple SSIDs, each with different wireless
security settings. Clicking [Do not use Multi Security function] will
disable the Multi Security function. The AirStation will then allow
one SSID and one type of wireless security.
Note: When using Multi Security, you need to enable at least one of the
following SSID1, SSID2, or SSID3.
Multi Security SSID1 can use WPA-PSK-TKIP or WPA/WPA2-Mixed for
wireless security.
Multi Security SSID2 can use WPA-PSK-AES for wireless security.
Multi Security SSID3 can use WEP for wireless security.
When [Use] is checked, wireless devices connected to the AirStation
can communicate only with the Internet side, not with each other.
SSIDs may contain 1-32 alphanumeric characters.
Choose an authentication method for wireless connections.
54