Buffalo AirStation NFINITI WHR-HP-G300N Firmware User Manual page 49

Chapter 3 Installation
5
Connect the AirStation's LAN port to your computer with another LAN cable.
Turn on the AirStation, wait 60 seconds, and then turn on your computer.
AirStation
power outlet
6
Confirm that the devices are connected correctly as shown below.
power outlet
7
After the computer has booted, the LEDs on the AirStation should be in the following condi-
tion:
POWER
WIRELESS
ROUTER
DIAG
LAN
INTERNET
※ Refer to page 8 and 10 for LED locations and other details.
8
Launch a web browser. If the home page is displayed, setup is complete.
If a user name and password screen is displayed, enter [root] (in lower case) for the user name,
leave the password blank, and click [OK]. Follow the instructions on the screen to complete
setup.
You've completed initial setup of your AirStation. Refer to Chapter 4 for advanced settings.
WHR-HP-GN / WHR-HP-G300N User Manual
1) connect
ROUTER
ON
OFF
AUTO
LAN
１
２
1) connect
３
LAN cable
４
INTERNET
POWER
2) connect the power supply
computer
ON
modem
Green light on
Green light on or blinking
Green light on or off depending on your network
Off
Green light on or blinking
Green light on or blinking
PC
18