Buffalo AirStation NFINITI WHR-HP-G300N Firmware User Manual page 71

Chapter 4 Configuration
Parameter
PPPoE Connection No. *-Add
Preferred PPPoE Connection -Add
WHR-HP-GN / WHR-HP-G300N User Manual
Meaning
Keep Alive
If Keep Alive is enabled, the AirStation issues LCP echo requests
to maintain the connection with the PPPoE server once a minute.
If the server does not respond after 6 minutes, then the line is
considered disconnected and the AirStation will terminate the
connection. If your PPPoE connection is often disconnected,
disable Keep Alive.
This is displayed when clicking [Edit Preferred Connections].
Name
The name of destination to connect by PPPoE if [Destination
address] and [Source address] of the communication match.
Select the destination registered to PPPoE Connection List.
Destination address
Destination address to communicate. When communicating to
this destination address, the AirStation will communicate with
[Name of Connection].
Source address
Source address to communicate. When communicating from this
source address, the AirStation will communicate with [Name of
Connection].
40