Buffalo AirStation NFINITI WHR-HP-G300N Firmware User Manual page 52
Wireless n technology highpower router and access point
Hide thumbs
Also See for AirStation NFINITI WHR-HP-G300N:
- User manual (111 pages) ,
- Setting manual (4 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Chapter 3 Installation
7
Launch a web browser.
8
Notes:
• The default IP address of the AirStation is 192.168.11.100 on access point mode.
• If you have changed the IP address of the AirStation, enter that IP address.
9
Notes:
• By default, the password is blank (not set).
• If you forget your password, hold down the reset button (page 11) to initialize all settings. The pass-
word will then be blank. Note that all other settings will also revert to their default values.
10
Click [Wireless Config] > [WDS].
WHR-HP-GN / WHR-HP-G300N User Manual
Enter the LAN IP address of the AirStation in the
address field, then press the [Enter] key.
When this screen appears, enter [root] (in lower
case) for the user name and the password that
you set during initial setup. Click [OK].
21
Hide quick links:
Advertisement
Chapters
Table of Contents
