Appendix D - Tcp/Ip Settings - Buffalo AirStation NFINITI WHR-HP-G300N Firmware User Manual
Wireless n technology highpower router and access point
Hide thumbs
Also See for AirStation NFINITI WHR-HP-G300N:
- User manual (111 pages) ,
- Setting manual (4 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Appendix D - TCP/IP Settings
Windows 7
To configure TCP/IP in Windows 7, follow the procedure below.
1
Click [Start] > [Control Panel] > [Network and Internet].
2
Double click [Network and Sharing Center].
3
Click [Change Adapter Settings] on the left side menu.
4
Right click on [Local Area Connection], then click [Properties].
5
If the message "Windows needs your permission to continue" appears, click [Continue].
6
Select [Internet Protocol Version 4 (TCP/IPv4)] then click [Properties].
7
To have DHCP set your IP address settings automatically, check [Obtain an IP address
automatically] and [Obtain DNS server address automatically].
To set your IP address settings manually, enter values for each setting. Example:
If the AirStation's IP address is 192.168.11.1,
IP address
Subnet mask
Default gateway
Preferred DNS server
Alternate DNS server
8
Click [OK].
WHR-HP-GN / WHR-HP-G300N User Manual
192.168.11.80
255.255.255.0
192.168.11.1
192.168.11.1
blank
111
Hide quick links:
Advertisement
Chapters
Table of Contents
