Makita 3708F Instruction Manual page 12

1
6
7
1. Wing nut
2. Wave washer
3. Flat washer
4. Guide plate
5. Straight guide
6. Center hole
7. Bolt
1
6
7
1. Wing nut
2. Wave washer
3. Flat washer
4. Guide plate
5. Straight guide
6. Center hole
7. Bolt
1. Nail
2. Center hole
3. Straight guide
12
For cutting circles between 70 mm (2-3/4") and
001993
121 mm (4-3/4") in radius.
2
3
4
5
For cutting circles between 121 mm (4-3/4") and
001994
221 mm (8-11/16") in radius.
2
3
NOTE:
• Circles between 172 mm (6-3/4") and 186 mm (7-5/16")
in radius cannot be cut using this guide.
4
5
Align the center hole in the straight guide with the center of
002010
the circle to be cut. Drive a nail less than 6 mm (1/4") in
diameter into the center hole to secure the straight guide.
1
Pivot the tool around the nail in clockwise direction.
2
3