Honda Mid-mount rotary mower Operator's Manual page 33

- 3. Turn the descent speed adjust knob fully clockwise.
DESCENT SPEiD ADJUST KNOB
-
4. Push the hydraulic lift lever toward "DOWN" to be sure that the cut-
ter deck is locked in the fully raised position. Return the lift lever to
"NEUTRAL" and then stop the engine and remove the ignition key.
- 5. With the cutter deck raised fully, check that the tensioner arm con-
tacts the stopper on the frame.
If the arm does not contact the stopper, turn the tensioner knob
clockwise until contact is reached.
TENSIONER ARM
TENSIONER KNOB
- 6. Return the descent speed adjust knob to its original position.
m
The cutter deck will automatically lower to the ground as the
descent speed adjust knob is turned counterclockwise. Keep clear of the
deck.
31