Blade Bolt Tightness/Blade - Honda Mid-mount rotary mower Operator's Manual

7. Blade bolt tightness/Blade replacement.
m
To avoid severe personal injury, remove the ignition key and
disconnect the spark plug cap to prevent accidental starting, and wear
heavy gloves to protect your hands from the cutter blade.
W Blade bolt tightness
-
1. Remove the cutter deck from the tractor (see page 47).
-
2. Turn the cutter deck upside down.
-
3. Clean dirt and grass from the blade and the inside of the cutter deck.
-
4. Hold the blade firmly, check that the blade bolt is properly tightened.
Blade bolt torque: 6.0 kg-m (43 ft-lb)
TORQUE WRENCH
n
Blade removal
[ IMPORTANT NOTICE ) u
se genuine Honda replacement blades or equiva-
lent.
- 1. Hold the
- 2. Remove
50
blade firmly, and remove the blade bolt and the
the blade and blade holder.
BLADE BOLT
WASHER
BLADE
BLADE HOLDER
washer.