Table of Contents
Advertisement
-
5. Insert the end of the tensioner
spring into the hole in the tensioner
arm. Hook the another
end against
the frame.
TENSIONER SPRING
-
6. Install the front hitch pivot A removed in Step 1 on the frame from
the inside. Install the tensioner
guard on the frame from the outside
as shown,
using the six 8 x 20 mm flange
bolts removed
in Step 1,
and tighten
to the specified
torque.
Torque
specification:
2.2 kg-m (16 ft-lb)
FRONT HITCH
FLANGE BOLTS
Bx20mm
TENSIONER GUARD
PIVOT A
15
Advertisement
Table of Contents
