Honda Mid-mount rotary mower Operator's Manual page 29

8. Adjustment of cutter deck lift link
n
Cutter deck lift plate
- 1. Place the tractor on a firm, level surface. Apply and lock the parking
brake.
- 2. Start the engine, move the hydraulic cylinder selector lever (optional
part) to "FRONT", and raise the cutter deck fully with the hydraulic
lift lever. *
- 3. Turn the descent speed adjust knob fully clockwise.
- 4. Stop the engine, and remove the key from the ignition switch.
- 5. Adjust the deck lift plates until the height of the cutter deck is equal1
on both sides by loosening the lock nuts and turning the adjust pins
as required.
- Turn the cutter deck lift speed adjust knob counterclockwise to
adjust the cutter deck lift plates.
- Use the hydraulic lift lever to lower the cutter deck.
- 6. After the height of the cutter deck becomes equal on both sides.
Raise the cutter deck and turn the cutter deck lift speed adjust knob
clockwise.
- 7. If the height of the cutter deck is less than 115 mm (4.5 in.), adjust
with the cutter deck lift rod adjust pins until the height is from 1 15 to
118 mm (4.5 to 4.7 in.).
CUTTER DECK LIFT PLATE
27