2. Deck drive belt
m
To avoid
severe
personal
injury
remove
the ignition
key and
disconnect
the spark plug cap to prevent
accidental
starting.
-
1. Lower the cutter
deck fully,
remove the ignition
key and disconnect
the spark plug lead. Visually
inspect the drive belt for wear, cracks or
other
faults.
If the drive belt is faulty,
follow
the replacement
pro-
cedure
described
on page 46.
DECK DRIVE BELT
-
2. Reconnect
the
spark
plug,
start
the
engine,
move
the
hydraulic
cylinder
selector
lever (optional
part) to "FRONT",
and raise the cut-
ter deck fully with the hydraulic
lift lever.
HYDRAULIC
LIFT LEVER
'HYDRAULiC
CYLINDER
SELECTOR LEVER
(OPTIONAL
PART)
30