Steam Generation System; Steam Cleaning - AEG BS9304001 User Manual

Steam generation system

CAUTION!
Dry the steam generator after each use. Remove the water with the sponge.
Remove the limescale with water and vinegar.
CAUTION!
Chemical de-scaling agents can cause damage to the enamel. Follow the instructions of the
manufacturer.
Cleaning the water drawer and the steam generator:
1. Put the water and vinegar mixture (approximately 250 ml) through the water drawer
into the steam generator. Wait for approximately 10 minutes.
2. Remove the water and vinegar with the sponge.
3. Put clean water (100 - 200 ml) into the water drawer to flush the steam generation
system.
4. Remove the water from the steam generator with the sponge and rub it dry.
5. Keep the door open to let the appliance dry fully.

Steam Cleaning

1. Remove the worst of the dirt manually.
2. Put 250 ml of water with 3 tablespoons of vinegar directly into the steam generator.
3. Activate the Steam Cleaning in the main menu. The display shows the duration of the
function.
4. An acoustic signal sounds when the programme is completed. Touch a sensor field to
deactivate the signal.
5. Wipe out the appliance with a soft cloth. Remove the remaining water from the steam
generator.
6. Keep the appliance door open for approximately 1 hour. Wait until the appliance is dry.
Shelf support
You can remove the shelf support to clean the side walls.
Removing the shelf support
1. Carefully pull the support up and out of
the front catch.
Care and cleaning
23