Installation Summary - Cisco Aironet 1130AG Quick Start Manual

Installation Summary

Installing the access point involves these operations:
•
Mounting the access point
• Connecting power
•
Obtaining an IP address
•
Configuring power
• Configuring basic settings
•
Configuring security settings
Before you install the access point, make sure that you are using a computer
connected to the same network as the access point, and obtain the following
information from your network system administrator:
• A system name
•
The case-sensitive wireless service set identifier (SSID) for your radio
network
•
A Simple Network Management Protocol (SNMP) community name and
the SNMP file attribute (if SNMP is in use)
Quick Start Guide Cisco Aironet 1130AG Access Point
13