Installation Summary - Cisco Aironet 1240AG Series Hardware Installation Manual

Chapter 2 Installing the Access Point
Figure 2-2
Figure 2-2
1
2

Installation Summary

While installing the access point, you will perform these operations:
•
•
•
•
•
•
OL-7293-01
D r a f t 1 A - C I S C O C O N F I D E N T I A L
illustrates the 5-GHz connector end of the access point.
Access Point 5-GHz Connector End
Security key slot
5-GHz antenna connector (left)
Mount the mounting plate on a convenient flat horizontal or vertical surface, such as a desktop, book
shelf, file cabinet, wall, ceiling, or suspended ceiling T-rail. See these sections:
"Mounting on a Horizontal or Vertical Surface" section on page 2-7
–
"Mounting Below a Suspended Ceiling" section on page 2-8
–
"Mounting Above a Suspended Ceiling" section on page 2-9
–
– "Mounting Access Point on a Desktop or Shelf" section on page
Attach the access point to the mounting plate (see the
Plate" section on page 2-16).
Secure the access point (see the
Connect Ethernet and power cables (see the
page 2-12).
Configure basic settings (refer to
Configure security and other access point options (refer to the Cisco IOS Software Configuration
Guide for Cisco Aironet Access Points).
3 5-GHz antenna connector (right/primary)
"Attaching the Access Point to the Mounting
"Mounting Below a Suspended Ceiling" section on page
"Connecting the Ethernet and Power Cables" section on
Chapter 3, "Configuring the Access Point for the First
Cisco Aironet 1240AG Series Access Point Hardware Installation Guide
Installation Summary
2-11).
2-8).
Time").
2-5