Checking The Access Point Leds - Cisco Aironet 1130AG Quick Start Manual

Checking the Access Point LEDs

If your access point is not working properly, check the Status LED on the top
panel or the Ethernet and Radio LEDs in the cable bay area. You can use the
LED colors to assess the unit status.
Note
To see the Ethernet and Radio LEDs you must open the access
point cover. (Refer to the "How to Open the Top Cover" section
on page 2.)
The LED meanings are in this table.
Top of Unit
Status LED
Blue
Light green
—
40
Cable Bay Area
Ethernet LED Radio LED
— —
— —
Blinking —
green
Meaning
Normal operating condition;
at least one wireless device
associated.
Normal operating condition;
no wireless device associated.
Transmitting or receiving
Ethernet packets.
78-15955-02