Installing the 7914 Expansion Module
Connecting the Support Bar to the Cisco IP Phone 7960
Step 1
Step 2
Step 3
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
4-6
Figure 4-2
Foot Pins on the Cisco IP Phone 7960
To connect the support bar to the Cisco IP Phone 7960, follow these steps.
Procedure
Position the support bar on the back of the IP Phone so that it fits flush with the
phone.
Locate the two connector pins, as illustrated in
Using a flat head screwdriver, carefully push each of the connector pins so that
the support bar is firmly fastened to the IP Phone.
Chapter 4
Adding the Cisco IP Phone 7914 Expansion Module
Figure
4-3.
78-10453-04