NETGEAR ReadyNAS 102 Hardware Manual page 51

To replace a 2.5-inch hard disk drive (HDD) or 2.5-inch solid-state drive (SSD):

1. If necessary, slide the disk tray handle locking mechanism to the unlocked position.
2. Press the disk tray release latch.
The tray handle pops out.
3. Pull out the disk tray and replace the 2.5-inch HDD or SSD:
a. Remove the screws and the old 2.5-inch HDD or SSD.
b. Place the new 2.5-inch HDD or SSD in the disk tray.
c. Secure the HDD or SSD to the disk tray using the screws.
ReadyNAS OS 6 Desktop Storage Systems
Disks
51