Status Information; System Shutdown - NETGEAR ReadyNAS 102 Hardware Manual

Status Information

You can obtain information about the status of your storage system by reviewing the
indicators listed in the following table.
Table 3. ReadyNAS 312 indicator descriptions
Indicator
Power button and LED
Disk LEDs (1, 2)
Disk activity LED
Rear panel Ethernet port
LEDs

System Shutdown

When the system is connected to a power supply, the system automatically powers on.
You can shut down your storage system in these ways:
• Preferred shutdown. Press the Power button twice to initiate a graceful shutdown.
• Forced shutdown. If the storage system is not responding, unplug it.
• Using the ReadyNAS local admin page. For information about using the ReadyNAS
local admin page to shut down your storage system, see the ReadyNAS OS 6 Software
Manual, which is available at
ReadyNAS OS 6 Desktop Storage Systems
Description
Press this button to turn on the ReadyNAS. The LED has these states:
• Blinking. Booting or shutting down
• On. Powered on
• Off. Powered off
Each disk bay has an LED associated with it on the front panel of the storage
system. The disk LEDs have these states:
• On. Power is on and the disk is operating normally.
• Blinking. The disk was removed, failed, or is resynchronizing.
• Off. The disk bay is empty.
The disk activity LED has these states:
• On. At least one disk is present.
• Blinking. A disk is active.
• Off. No disks are present.
Two LED status indicators are built into this port, one green and one amber.
They indicate port speed and activity as follows:
• Green on, amber off. 1000 Mbps connection speed, no activity
• Green blinking, amber off. 1000 Mbps connection speed, activity
• Green off, amber on. 10 Mbps or 100 Mbps connection speed, no activity
• Green off, amber blinking. 10 Mbps or 100 Mbps connection speed, activity
• Green off, amber off. No connection
http://support.netgear.com/product/ReadyNAS-OS6.
NETGEAR ReadyNAS 312
27