System Shutdown; Boot Menu - NETGEAR ReadyNAS 102 Hardware Manual

System Shutdown

When the system is connected to a power supply, the system automatically powers on.
You can shut down your storage system in these ways:
• Preferred shutdown.
1. Press the Power button.
The status display screen wakes.
2. Press the Power button a second time.
Instructions for graceful shutdown display on the status display screen.
3. Press the Power button a third time.
The system shuts down gracefully.
• Forced shutdown. If the storage system is not responding, unplug it.
• Using the ReadyNAS local admin page. For information about using the ReadyNAS
local admin page to shut down your storage system, see the ReadyNAS OS 6 Software
Manual, which is available at

Boot Menu

Use the boot menu to restart or troubleshoot your ReadyNAS storage system. Your storage
system has the following boot modes:
• Normal. Initiates a normal boot process, just like booting using the Power button.
• Factory default. Initiates a short disk test that takes approximately 5 minutes. After the
disk test, a 10-minute time-out period begins.
• If you want to cancel the factory default process, power off the storage system before
the 10-minute time-out ends. The system powers down safely without causing any
data loss.
• If you want to perform a factory default, do not power off your system. After the
10-minute time-out period, the factory default process begins.
Tip: To start the factory default process immediately, press the Backup
button during the 10-minute time-out period.
WARNING!
The factory default reboot process resets the storage system to
factory settings, erases all data, resets all defaults, and reformats
the disk to X-RAID2.
ReadyNAS OS 6 Desktop Storage Systems
http://support.netgear.com/product/ReadyNAS-OS6.
NETGEAR ReadyNAS 314
35