Chapter 5 Netgear Readynas - NETGEAR ReadyNAS 102 Hardware Manual

To access the boot menu:

1. Power off your storage system.
2. Using a straightened paper clip, press and hold the Reset button.
3. Press the Power button to power on the storage system.
4. Continue to press the Reset button until the Power button LED, USB and backup status
LED, disk 1 LED, and disk 2 LED light.
5. Press the Backup button to scroll through boot mode options.
The storage system shows the boot mode options using the LEDs, as described in the
following table:
Boot Mode
Boot menu
Normal
Factory default
OS reinstall
Tech support
Volume read only
Memory test
Test disk
Legend:
• On:

• Off:

6. Press and release the Reset button to confirm your boot menu selection.
The system boots in the selected boot mode.
ReadyNAS OS 6 Desktop Storage Systems
Description
All four LEDs light.
Power LED lights.
Disk 1 LED lights.
Disk 2 LED lights.
USB and backup status LED lights.
Power LED and disk 1 LED light.
Power LED and disk 2 LED light.
Power LED and USB and backup status
LED light.
NETGEAR ReadyNAS 312
29
Status Indicator
Power Disk 1
LED LED






 
 
 




Disk 2 USB
LED and
Backup
LED
 
 
 




 



