Table of Contents
Advertisement
Step 3: Log Onto the IP Utility and Discover Network Devices
Document 800-07067 Rev C
11/10
HCD5MIH/X 720p True Day/Night Network Box Camera Reference Guide
1.
Double-click the Honeywell IP Utility icon
-OR-
Click Start
Programs
Utility
Honeywell IP Utility.
The Honeywell IP Utility Log On window opens.
Figure 3-2
Honeywell IP Utility Log On Window
2.
Select Administrator or Guest from the User Name drop-down list.
3.
Enter the case-sensitive password in the Password field.
•
The default Administrator password is 1234.
•
The default Guest password is guest.
Note
During the installation set up, you must log on as an Administrator to access
all the features.
4.
Click the arrow button
The Honeywell IP Utility program searches for devices on the network and opens to
the Honeywell IP Utility user interface.
5.
Automatically discover or manually refresh the list of devices on the network.
Use the manual refresh if a new device was added after you logged onto the system.
•
You do not need to do anything to discover devices. When you log on to the IP
Utility, the devices on the network — including the devices on other subnets —
are automatically discovered and listed in the Discovery pane. After the initial
discovery, the network automatically continues to discover devices that are newly
added to the network.
•
To manually refresh the device list, click the Refresh (
the top of the Discovery pane.
6.
Enable or disable the HTTP Server checkbox for additional security. Only an
Administrator can disable (uncheck the box), resulting in the user being unable to
access the Web-Client, although video recording is unaffected.
on your desktop.
Honeywell Video Systems
.
EQUIP Series
IP
) button, located near
29
Advertisement
Table of Contents
