Navigating The Web-Client User Interface; Figure 4-2 Web-Client Window Layout: Administrator Log On; Table 4-2 Tabs/Views In The Web-Client Application - Honeywell Equip 720p Series Reference Manual

Navigating the Web-Client User Interface

The URL corresponds to the IP Address as
configured in the IP Utility.
If logged on as a Guest, only the Live
View tab is available. Administrators
can access all tabs.
The image from your
HCD5MIH/X camera
displays on every tab.
Document 800-07067 Rev C
11/10
HCD5MIH/X 720p True Day/Night Network Box Camera Reference Guide
Figure 4-2 Web-Client Window Layout: Administrator Log On
Each tab has a section for configuration
and/or navigation controls.
The Web-Client application user interface consists of multiple user-friendly views organized
by function. Access to the views is user-controlled.
Table 4-2 Tabs/Views in the Web-Client Application
Tab Enables you to...
Live View View video and take SnapShots.
Device Settings View the network settings and firmware details of the camera.
Restore to factory defaults and reboot a camera.
Compression Configure the compression.
Settings
Set the maximum bit rate and/or target bit rate that the camera will
provide across the network based on priority mode settings. This
value is the threshold that you do not want the bit rate to exceed.
View received bit rate and frame rate statistics of the current image
in real time.
Camera Setup Configure auto exposure and white balance for the camera.
Video Analytics Configure the camera sabotage detection settings and view video
display.
IO and Audio Configure the alarm and audio settings.
Click Logout to exit the program.
Confirm the user type logged in.
Click the tabs
to access the
available
configurations
and settings.
SnapShot
43