Installing the Honeywell IP Utility and
Web-Client Software
About the Honeywell IP Utility and Web-Client
About the Honeywell IP Utility
Document 800-07067 Rev C
11/10
This chapter describes how to:
•
Install and log onto the IP Utility
•
Connect to a device and configure network settings using the IP Utility
•
Launch the Web-Client software
•
Uninstall the IP Utility, Bonjour, or ActiveX software
•
Perform firmware upgrades
The Honeywell IP Utility is a software application that is installed from a CD or
downloaded from the Honeywell Systems Group website (www.honeywellvideo.com). It
is installed on a local workstation and primarily used by Administrators to configure the
®
EQUIP
Series of products residing on an IP network.
The IP Utility enables users to:
•
Discover device(s) on a network
•
Configure the IP network settings, name device(s), upgrade firmware, change
passwords.
•
Open individual Web-Client applications for each discovered device.
Note
Before installing and using the Honeywell IP Utility, confirm that your
HCD5MIH/X camera is connected to the network through an Ethernet cable
(see
Connecting to a Network via an RJ-45 Ethernet Connector
3
on page 23).
25