Cns Config Partial - Cisco MWR 2941 Command Reference Manual

cns config partial

cns config partial
To start the Cisco Networking Services (CNS) configuration agent and accept a partial configuration,
use the cns config partial command in global configuration mode. To shut down the CNS partial
configuration agent, use the no form of this command.
Syntax Description
host-name
ip-address
encrypt
port-number
source
interface name
inventory
Command Default
The CNS configuration agent is not enabled to accept a partial configuration and the router does not
request or receive updates.
Command Modes Global configuration (config)
Command History Release
12.2(2)T
12.0(18)ST
12.0(22)S
12.2(2)XB
12.2(8)T
12.3(1)
12.2(25)S
12.4(4)T
12.2(33)SRA
12.2(33)SB
12.2(33)SXI
12.4(20)MR
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
68
cns config partial {host-name | ip-address} [encrypt] [port-number] [source interface name]
[inventory]
no cns config partial
Hostname of the configuration server.
IP address of the configuration server.
(Optional) Uses a Secure Sockets Layer (SSL) encrypted link between the
router and the web server.
(Optional) Port number of the configuration service. The value is from 0 to
65535. The default is 80 with no encryption and 443 with encryption.
(Optional) Specifies the source of this device.
(Optional) Interface name to use as the source of this device.
(Optional) Sends an inventory of the line cards and modules in the router to
the CNS configuration engine as part of the HTTP request.
Modification
This command was introduced.
This command was integrated into Cisco IOS Release 12.0(18)ST.
This command was integrated into Cisco IOS Release 12.0(22)S.
This command was implemented on Cisco IAD2420 series Integrated
Access Devices (IADs).
The source keyword and encrypt arguments were added.
The inventory keyword was added.
This command was integrated into Cisco IOS Release 12.2(25)S.
This command was modified to include enhanced CNS error messages.
This command was integrated into Cisco IOS Release 12.2(33)SRA.
This command was integrated into Cisco IOS Release 12.2(33)SB.
This command was integrated into Cisco IOS Release 12.2(33)SXI.
This command was integrated into Cisco IOS Release 12.4(20)MR.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01