Cisco MWR 2941 Command Reference Manual page 418

service-policy (policy-map class)
•
•
•
Examples
The following example creates a hierarchical service policy in the service policy called parent:
Router(config)# policy-map child
Router(config-pmap)# class voice
Router(config-pmap-c)# priority 500
Router(config-pmap-c)# exit
Router(config-pmap)# exit
Router(config)# policy-map parent
Router(config-pmap)# class class-default
Router(config-pmap-c)# shape average 10000000
Router(config-pmap-c)# service-policy child
Related Commands Command
bandwidth (policy-map class)
fair-queue
policy-map
priority
service-policy
shape
show policy-map
show policy-map interface
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
400
The shape command can be used in either the parent or the child policy, but not both polices
simultaneously on a subinterface.
The fair-queue command cannot be defined in the parent policy.
If the bandwidth command is used in the child policy, the bandwidth command must also be used
in the parent policy. The one exception is for policies using the default class.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Description
Specifies or modifies the bandwidth allocated for a class
belonging to a policy map.
Specifies the number of queues to be reserved for use by a
traffic class.
Specifies the name of the service policy to configure.
Gives priority to a class of traffic belonging to a policy
map.
Specifies the name of the service policy to be attached to
the interface.
Specifies average or peak rate traffic shaping.
Displays the configuration of all classes for a specified
service policy map or all classes for all existing policy
maps.
Displays the configuration of all classes configured for all
service policies on the specified interface or displays the
classes for the service policy for a specific PVC on the
interface.
OL-23890-01