Table of Contents
Advertisement
show adjacency
show adjacency
To display information about the Cisco Express Forwarding adjacency table or the hardware
Layer 3-switching adjacency table, use the show adjacency command in user EXEC or privileged
EXEC mode.
Syntax Description
ip-address
interface-type
interface-number
null number
vlan number
serial number
connectionid number
link {ipv4 | ipv6 | mpls} (Optional) Specifies the link type (IPv4, IPv6, or Multiprotocol Label
detail
summary
Command Modes
User EXEC (>)
Privileged EXEC (#)
Command History
Release
11.2GS
11.1CC
12.0(7)XE
12.1(1)E
12.1(3a)E3
12.1(5c)EX
12.1(11b)E
12.2(8)T
12.2(14)SX
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
456
show adjacency [ip-address] [interface-type interface-number | null number | port-channel
number | sysclock number | vlan number | ipv6-address | fcpa number | serial number]
[connectionid number] [link {ipv4 | ipv6 | mpls}] [detail | encapsulation]
show adjacency summary [interface-type interface-number]
(Optional) An IP address.
(Optional) Interface type and number. Valid values for the interface-type
argument are atm, async, auto-template, ctunnel, dialer, fastethernet,
gigabitethernet, group-async, loopback, mfr, multilink, tunnel, vif,
virtual-template, and vlan.
(Optional) Specifies the null interface. The valid value is 0.
(Optional) Specifies the VLAN; valid values are 1 to 4094.
(Optional) Specifies the serial interface number; valid values are 1 to 6.
(Optional) Specifies the client connection identification number.
Switching (MPLS] traffic) of the adjacency.
(Optional) Displays the protocol detail and timer information.
(Optional) Displays a summary of Cisco Express Forwarding adjacency
information.
Modification
This command was introduced.
Multiple platform support was added.
Support was added for the Cisco 7600 series routers.
Support was added for the Cisco 7600 series routers.
The number of valid values for port-channel number changed.
This command was modified to include Layer 3 information.
The atm, ge-wan, and pos keywords were added.
The detail keyword output was modified to show the epoch value for each entry
of the adjacency table.
The summary keyword output was modified to show the table epoch for the
adjacency table.
Support for this command was added for the Supervisor Engine 720.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01
Advertisement
Table of Contents
