Cisco MWR 2941 Command Reference Manual page 237

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
Examples
In the following example, a class called "class-c1" has been created using the class-map command, and
the match atm clp command has been configured inside that class. Therefore, packets are matched on
the basis of the ATM CLP and are placed into this class.
Router> enable
Router# configure terminal
Router(config)# class-map class-c1
Router(config-cmap)# match atm clp
Router(config-cmap)# end
Related Commands Command
class-map
show atm pvc
show policy-map
interface
OL-23890-01
Description
Creates a class map to be used for matching packets to a specified class.
Displays all ATM PVCs and traffic information.
Displays the packet statistics of all classes that are configured for all service
policies either on the specified interface or subinterface or on a specific PVC
on the interface.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
match atm clp
219