Cisco MWR 2941 Command Reference Manual page 599

Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
• Traffic Shaping on Serial Interface: Example, page -581
• Two-Rate Traffic Policing: Example, page -584
• Multiple Traffic Policing Actions: Example, page -585
Percentage-Based Policing and Shaping: Example, page -586
•
Traffic Shaping: Example, page -588
•
Traffic Policing: Example, page -589
•
Traffic Shaping on Serial Interface: Example
The following sample output from the show policy-map interface command displays the statistics for
the serial 3/2 interface, to which a service policy called p1 (configured as shown below) is attached.
Traffic shaping has been enabled on this interface. See
fields that commonly appear in the command output.
policy-map p1
class c1
shape average 320000
Router# show policy-map interface serial3/2 output
Serial3/2
Service-policy output: p1
Class-map: c1 (match-all)
OL-23890-01
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip precedence 0
Traffic Shaping
Target Byte Sustain
Rate Limit bits/int
320000 2000 8000
Queue Packets Bytes
Depth
0 0 0
Table 50
Excess Interval
bits/int (ms)
8000 25
Packets Bytes
Delayed Delayed
0 0
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
show policy-map interface
for an explanation of the significant
Increment Adapt
(bytes) Active
1000 -
Shaping
Active
no
581