Match Dscp - Cisco MWR 2941 Command Reference Manual

match dscp

match dscp
To identify one or more differentiated service code point (DSCP), Assured Forwarding (AF), and
Certificate Server (CS) values as a match criterion, use the match dscp command in class-map
configuration mode. To remove a specific DSCP value from a class map, use the no form of this
command.
Syntax Description
ip
dscp-value
Command Default No match criteria is configured.
If you do not enter the ip keyword, matching occurs on both IPv4 and IPv6 packets.
Command Modes Class-map configuration
Command History Release
12.2(13)T
12.0(28)S
12.0(17)SL
12.4(20)MR
12.2(33)MRA
15.0(1)MR
Usage Guidelines
DSCP Values
You must enter one or more differentiated service code point (DSCP) values. The command may include
any combination of the following:
•
•
•
•
•
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
222
match [ip] dscp dscp-value [dscp-value dscp-value dscp-value dscp-value dscp-value dscp-value
dscp-value]
no match [ip] dscp dscp-value
(Optional) Specifies that the match is for IPv4 packets only. If not used, the
match is on both IPv4 and IPv6 packets.
The DSCP value used to identify a DSCP value. For valid values, see the
"Usage Guidelines."
Modification
This command was introduced. This command replaces the match ip dscp
command.
Support for this command in IPv6 was added in Cisco IOS
Release S12.0(28)S on the
This command was implemented on the Cisco 10000 series router.
This command was integrated into Cisco IOS Release 12.4(20)MR.
This command was integrated into Cisco IOS Release 12.2(33)MRA.
This command was integrated into Cisco IOS Release 15.0(1)MR.
numbers (0 to 63) representing differentiated services code point values
af numbers (for example, af11) identifying specific AF DSCPs
cs numbers (for example, cs1) identifying specific CS DSCPs
default—Matches packets with the default DSCP.
ef—Matches packets with EF DSCP.
Cisco MWR 2941 Router Command Reference, Release 15.0(1)MR
OL-23890-01