For Vigor2930Vs - Draytek Vigor2930 Series User Manual

1 . 2 . 4 F o r V i g
1 . 2 . 4 F o r V i g
LED
ACT (Activity)
DoS
CSM
CPA (Content Portal Authority)
WAN1/2
MGMT
Phone 1/2
LED on Connector
ISDN S0 1
ISDN S0 2
WAN 1/2
6
o r 2 9 3 0 V S
o r 2 9 3 0 V S
Left LED
(Orange)
Right LED
(Green)
Left LED
(Orange)
Right LED
(Green)
Left LED
(Green)
Right LED
(Green)
Status Explanation
Blinking The router is powered on and running normally.
Off The router is powered off.
On The DoS/DDoS function is active.
Blinking It will blink while deleting an attack.
On The profile of CSM (Content Security
Management) for IM/P2P application is active. (It
is enabled from Objects Setting >> CSM Profile).
On The Web Content Filter is active. (It is enabled
from Firewall >> Web Content Filter Setup)
On The WAN1 or WAN2 port is connected.
Blinking It will blink while transmitting data.
On The router is managed (handled) by Telnet.
Blinking It will blink while transmitting data.
On The phone connected to this port is off-hook.
Off The phone connected to this port is on-hook.
Blinking A phone call comes.
On ISDN NT (ISDN S0 intern) mode is active and an
ISDN phone adapter is connected.
Blinking ISDN NT (ISDN S0 intern) mode is active and an
ISDN phone adapter is not connected.
On A phone has been connected. If not, green LED will
be off.
Blinking An ISDN phone is off-hook or a phone call comes.
On ISDN NT (ISDN S0 intern) mode is active
configured from VoIP>>Phone Settings and an
ISDN phone adapter is connected.
Blinking ISDN NT (ISDN S0 intern) mode configured from
VoIP>>Phone Settings is active and an ISDN
phone adapter is not connected.
Off It means ISDN TE mode is active which is
configured from VoIP>>Phone Settings.
On A phone adapter with phone set has been connected
(ISDN S0 intern mode) or ISDN line has been
connected (ISDN S0 extern mode). It will be off if
there is nothing connected.
Blinking In ISDN NT (ISDN S0 intern) mode, it means an
ISDN phone is off-hook or a phone call comes.
In ISDN TE mode, it means data, fax or voice
(phone call) is transmitting.
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 100Mbps.
Off The port is disconnected with 10Mbps.
Vigor2930 Series User's Guide