General Setup - Draytek Vigor2930 Series User Manual

3 . 1 2 . 2 G e n e r
3 . 1 2 . 2 G e n e r
By clicking the General Settings, a new web page will appear so that you could configure
the SSID and the wireless channel. Please refer to the following figure for more information.
Enable Wireless LAN
Mode
Index(1-15)
SSID
Channel Width
Channel
144
a l S e t u p
a l S e t u p
Check the box to enable wireless function.
At present, the router upports IEEE802.11b,
IEEE802.11g and IEEE802.11n protocols
simultaneously.
Set the wireless LAN to work at certain time interval
only. You may choose up to 4 schedules out of the 15
schedules pre-defined in Applications >> Schedule
setup. The default setting of this filed is blank and the
function will always work.
The default SSID is "default". We suggest you change it
to a particular name. It is the identification of the wireless
LAN. SSID can be any text numbers or various special
characters.
To speed up the wireless transmission in a single and
small field, use Auto 20/40 MHz. To have large scale of
wireless covering but slower transmission, please choose
20 MHz.
It indicates the frequency of the wireless LAN. The
selection for this menu will be changed according to the
Channel Width you set. If you choose Auto 20/40 MHz,
you will have the following items to choose. You may
switch channel if the selected channel is under serious
interference.
Vigor2930 Series User's Guide