Status - Draytek Vigor2930 Series User Manual

Disallow VoIP to ISDN
Calls with the Following
Prefixes
3 . 1 0 . 4 S t a t u s
3 . 1 0 . 4 S t a t u
From this page, you can find codec, connection and other important call status for each port.
Refresh Seconds
Port
Vigor2930 Series User's Guide
s
Payload Type (rfc2833) - Choose a number from 96 to 127,
the default value was 101. This setting is available for the
OutBand (RFC2833) mode.
Set the prefix of the phone number to forbid the user dialing
through VoIP to ISDN. All the phone number with the
prefix specified here will not be allowed to connect through
the router. If a user dials the number by force, the router will
disconnect it automatically. The figure that you can type in
this field is limited one to eleven with digits from zero to
nine.
Specify the interval of refresh time to obtain the latest VoIP
calling information. The information will update immediately
when the Refresh button is clicked.
It shows current connection status for the port of Phone1,
Phone2, ISDN1 and ISDN2. The ISDN1/2 appears only when
the router is equipped with ISDN interface. ISDN1 means B1
channel for the physical ISDN port; ISDN2 means B2 channel
for the physical ISDN port. Be aware that ISDN1/2 port is
available for the users living in Europe and using Vigor
2930VSn only. For other V models, only the status for VoIP1
and VoIP2 will be shown in this page.
133