The major difference between these two modes is that: while in Repeater mode, the packets
received from one peer AP can be repeated to another peer AP through WDS links. Yet in
Bridge mode, packets received from a WDS link will only be forwarded to local wired or
wireless hosts. In other words, only Repeater mode can do WDS-to-WDS packet forwarding.
In the following examples, hosts connected to Bridge 1 or 3 can communicate with hosts
connected to Bridge 2 through WDS links. However, hosts connected to Bridge 1 CANNOT
communicate with hosts connected to Bridge 3 through Bridge 2.
Click WDS from Wireless LAN menu. The following page will be shown.
Mode
Security
76
Choose the mode for WDS setting. Disable mode will not invoke
any WDS setting.
There are three types for security, Disable, WEP and Pre-shared
key. The setting you choose here will make the following WEP or
Pre-shared key field valid or not. Choose one of the types for the
router.
Vigor2100 Series User's Guide